- Plastic pressure
pipe systems are used for the conveyance of drinking water, waste
water, chemicals, heating and cooling fluids, foodstuffs, ultra-pure
liquids, slurries, gases, compressed air and vacuum system
applications, both for above and below ground applications.
- When compared to
other plastics, polyethylene shows excellent diffusion resistance, and
because of this property, polyethylene has been used for gas
conveyance for many years.
-
Forming the pipe liner inside a host pipe is
similar to plastic thermoforming, where plastic sheet is heated to a
forming temperature and then deformed or stretched to a desired shape
using vacuum or pressure. Often, the thermoformed shape is defined by
a mold.
- The Swagelining
process uses PE pipe which has an outside diameter slightly larger
than the inside diameter of the pipe to be lined. During the
installation process, the PE pipe is pulled through a die to
temporarily reduce its outside diameter. This reduction allows the PE
to be easily pulled through the host pipe by a winch. When the pulling
force has been discon-nected, the PE pipe begins to return toward its
original diameter.
- Polyethylene
pipe provides the unique light weight, joint integrity, and overall
toughness of polyethylene has resulted in the above-ground
installation of polyethylene pipe in various mining, oil, gas
production and municipal distribution applications.
- Polyethylene
pipe is used for slurry transport in many industries such as those
that work with kaolins and phosphates. The ease of
installation and exceptional toughness of polyethylene pipe often make
it practical for oil and gas collection.
- In general,
polyethylene pipe can be used safely at temperatures as low as -75°F
(-60°C) and as high as 150°F (65°C).
- Unlike many
piping materials, polyethylene pipe will not rust, rot, pit, or
corrode as a result of chemical, electrolytic, or galvanic action. The
Primary chemical environments that pose potentially serious problems
for polyethylene pipe are strong oxidizing agents or certain
hydrocarbons.
- Polyethylene
pipe is widely used for a variety of applications including water and
sewer lines, chemical transfer, food processing, irrigation, mining
and dredging, geothermal power generation, telecommunications, and oil
and natural gas collection and transport.
|
Process
- Close Lining
Fitting
- A Multilayer
composite Plastics and Metals Pipeline System for the conveyance of
Water through Contaminated Land
-
External Three Layer Extruded
Polyethylene Based Coatings for On- Shore and Off-Shore Steel
Linepipes
- Fitness for
purpose issues relating to FBE and three layer PE coatings
- High
Pressure Saltwater Pipeline Rehabilation
- Pipeline
Rehabilitation with expanded and reoriented PVC
- Pipeline
Replacement using Relining
-
The Swagelining Process
Company
Profiles
- Company in
United Kingdom
- Company in China
- Company in
Norfolk
- Company in
Staffordshire
- Company in
Jordan
- Company in
P.R.China
- Company in
Zhyjiang
- Company in
Scotland
- Company in
Gainesville
- Company in
Texas
- Another Company
in United Kingdom
Consultant
- Consultant in
Texas
-
Consultants in California
- Consultants in
United Kingdom
- An expert of
Pipeline
Patent
- Process for
installing a pipe line
- Method for butt
welding cross-linked polyethylene pipes (PE-X pipes)
- Method of Lining
Pipes
-
Recycleable bulk bag containers
- Method for
relining underground pipelines
Technology
Adavnced
Onshore and Offshore Pipeline Coating Technologies
Renovation
Techniques and Materials for Pressure and Non-pressure Pipes
Natural Gas Pipeline Technology Overview
Overview of
Pipeline Rehabilitation Technology
Products
- High Density
Polyethylene Pipe System
-
20 & 30 mil Polyethylene Pond Liners
-
Tite Liner®
- High Density Polyethylene Pipe
- Pipeline
Products
|
Project
The Bison
Pipeline Project
Keyhole Squeeze-off Tool to Enable Repair of Large Polyethylene Gas
Pipes
Recent Pipeline
Projects
High density
polyethylene pipeline systems – “The better solution”
Use of PE 100 supply pipes for
the new construction of the BMW car factory in Leipzig
Applications
- Use of Bimodal
High-Density Polyethylene Pipe in Oil and Gas Service
Above-Ground Applications for
Polyethylene Pipe
Reinforced
Thermoplastic Pipeline System for Gas distribution
Polyethylene
Lining increases water injection line life
Machinery
Suppliers
- China Aurma
Machinery Technology Co Ltd
-
Kebeln plastic machinery co.,ltd
- Distributors of
Pipeline Plant Process Equipment
- China Min's
Group Limited
- Qingdao
Yifeng Plastic Machinery Co., Ltd
Market and
Standards
- Analysis of Thermoplastics Used in
Fold-and-Form Pipe Liners
Natural gas and
Distribution Module
Indian Standards
for Natural Gas Pipeline System
Thermoformed & Thermoplastic
Pipe Quality Assurance / Quality Control
Report
- Glass fibre reinforced linings for pipeline
rehabilitation
Gas Distribution
Why are
crosslinked PE tanks with linear PE Liners a bad idea
Intrinsic
Lifetime of Polyethylene Pipelines
Pipeline
Transportation: The Problem with Plastic Water Pipes
FastFusion Poly Pipe Field Fusion Welding
Suppliers
-
Polyethylene (PE) Pipeline Systems Suppliers - Worldwide
-
Polyethylene Liner Manufacturers
- PE pipeliner
Manufacturers & Suppliers
- PE Pipeline
Selling Leads
- Pipeline
Suppliers
Order
the CD ROM Today
|